How to resolve the usbhub.sys error in Windows 10?

December 21, 2018 |

greater than 3 minutes

The usbhub.sys error on Windows 10 can cause critical issues, and resolving them immediately is highly recommended.

The usbhub.sys is a system driver file for the Default Hub Driver developed by Microsoft for the Windows Operating System. A Universal Serial Bus (USB) hub is a device used to expand a USB port into various gateways to allow more device connections. It enables an easy connection between your computer and other devices such as a printer, mouse, or keyboard.

What Are the Causes of the usbhub.sys Blue Screen of Death Error?

In most cases, issues affecting SYS files like the usbhub.sys error on Windows 10 is caused by one of the following:

    • Damaged hard disk
  • Memory (RAM) corruption
  • Corrupted, outdated, or wrongly configured device drivers
  • Malware infection affecting the usbhub.sys file
  • Hardware issues after installing new hardware or software (such as a Windows update)
  • A failed Windows update

You’ll encounter this error during your computer’s startup, program startup, or when you try to run a specific function in your computer such as printing a document.

This article explores the different ways on how to repair the usbhub.sys error.

How to Fix the usbhub.sys Blue Screen Error

As a precaution, before making any major hardware or software changes to your PC, it’s always wise to create a backup or System Restore Point. This makes it easy to revert the changes in case you run into the usbhub.sys error.

1. Check the Health Status of Your Hard Disk (Check Disk)

Power outages, improper computer shut down, hardware failure and worn out hard drives can corrupt usbhub.sys files. As a result, the blue screen of death error causes your computer to freeze and restart randomly.

To perform a health check on your hard disk, you need to run chkdsk.

  1. Right-click Start > Command Prompt (Admin) or Windows PowerShell (Admin).
  2. On the permission dialog box, click “Yes.”
  3. Type chkdsk in the black box with a blinking cursor, and hit “Enter.”
  4. “chkdsk” will scan for hard disk damage or corruption.
  5. Follow the on-screen commands to successfully complete the process.

If there are issues with your hard disk, the scan will show the “Windows has scanned the file system and found no problems. No further action is required,” message.

2. Update Your Computer’s Device Drivers

The usbhub.sys error is attributed to outdated or corrupt device drivers. There are various reasons why drivers can suddenly stop working. Fortunately, the Blue Screen of Death error can be fixed by updating your PC’s device drivers.

Finding the drivers manually and trying to install them can be time-consuming as well as difficult. Plus, you risk installing incompatible drivers which could worsen the problem. Because of such complexities, we recommend installing the Auslogics Driver Updater tool.

The biggest advantage of using Auslogics Driver updater is that, not only will the software fix usbhub.sys blue screen error, but it will also scan and update all of your computer’s device drivers. Apart from providing an easy one-click feature to update all the drivers, the tool creates a backup of the drivers currently installed on your PC. This is a security measure that enables you to rollback a driver to its previous version.

Regular device driver updates prevent hardware conflicts and improve your computer’s overall performance.

3. Use Windows 10 System Restore Feature

System Restore can help you fix the usbhub.sys error by reverting recent changes you may have made on your computer. The feature returns your system files and programs back to a time when they were running smoothly and will not affect your documents, music, photos and other personal data.

To utilize Windows 10 System Restore:

  1. Click “Start” or press the Windows Key+S.
  2. Type system restore.
  3. Select the first result titled “Create a restore point” to open the “System Properties” window.
  4. Click on the “System Protection” tab, and then select “System Restore.”
  5. Click “Next,” and select a restore point from the list.
  6. Click “Next” and follow the System Restore Wizard prompts.

4. Use Windows System File Checker (sfc/scannow)

This command line allows Windows to scan and automatically replace the problematic system files that are causing the usbhub.sys error.

  1. Right-click Start, and choose “Command Prompt (Admin).”
  2. Type the command line sfc/scannow, then hit Enter.
  3. System scan will begin and might take a while depending on the number of files you have on your computer. If it finds any errors, follow the on-screen commands to fix them.

5. Check for Windows Update

If you still encounter the usbhub.sys Blue Screen of Death error, it might be associated with an outdated Windows version and it’s a good idea to check for Windows update.

  1. Launch the Settings app via the Start menu.
  2. Select Update & Security > Windows Update.
  3. Click “Check for updates.”
  4. If updates are available, click “Install Updates.”
  5. When the process is complete, restart your PC to find out if the usbhub.sys error has been fixed.

Which solution helped you fix the usbhub.sys error? Share your experience in the comments below.

Share it:
Do you like this post?
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)