The MAXIMUM_WAIT_OBJECTS_EXCEEDED blue screen error is a serious issue in Windows 10 that may appear after the installation of a new driver or software. Generally, when using your PC, a blue screen error is not what you want to see because it prevents you from accessing your desktop.
What Is Maximum_Wait_Objects_Exceeded Error?
The Microsoft Windows operating system has built-in wait blocks that make it possible for the system to wait on numerous objects simultaneously. However, there is a limit as to the number of objects your system can handle.
When the number of objects exceeds the number of your system’s built-in wait blocks, a subroutine steps in to cancel some of the objects. However, if the subroutine fails to maintain this balance, it means it is corrupt or deleted. This causes the bug check MAXIMUM_WAIT_OBJECTS_EXCEEDED to occur, displaying the value 0x0000000C.
This is not a common Windows problem. But since you can’t predict when it will happen, you need to know how to get rid of the 0xc Maximum_Wait_Objects_Exceeded BSOD. This post provides several solutions you can try.
How to Fix Maximum_Wait_Objects_Exceeded Blue Screen Error in Windows 10
Fix 1: Uninstall Recently Installed Third-Party Apps
Occasionally, third-party programs can cause some changes in your system that could lead to MAXIMUM_WAIT_OBJECTS_EXCEEDED errors. To determine if the app you recently installed is responsible for this error, you need to uninstall it.
To proceed with the uninstallation, you need to enter Safe Mode using the steps below:
- If you are unable to get to the log-in screen, turn your device off by holding down the “Power” button. Switch the PC on, and when Windows starts to load, hold down the “Power” button again until your computer switches off. Repeat this three times.
- Allow the PC to fully restart the fourth time. You will enter the Windows Recovery Environment (winRE).
- Select “Troubleshoot”, and then go to “Advanced options”.
- Select Startup Settings > Restart.
- On the next screen that opens, press F5 or 5 on your keyboard for “Safe Mode with Networking”. Your device restarts in Safe Mode.
- Now, open Settings > Apps.
- Scroll down to find a list of apps installed on your PC. You can use the “Sort by” or “Filter by” options to quickly find the third-party app you recently installed.
- Highlight it and select “Uninstall”.
- After Windows completes uninstalling the app, restart your PC.
If this option doesn’t get rid of the 0xc maximum_wait_objects_exceeded BSOD, try the next troubleshooting steps.
Fix 2: Disable, Rollback or Uninstall Recently Installed Third-Party Drivers
Like we mentioned earlier, driver installation can lead to conflicts and cause the BSOD. If you recently installed a device driver, try the following options to check if it’s responsible for the stop error.
Option 1: Disable Third-Party Driver
Most stop errors make it difficult to access the desktop. For this process to work, you need to enter Safe Mode using Steps 1 to 5 in Fix 1 above.
- Now, in Safe Mode, right-click “Start” and choose “Device Manager”.
- Find the device for which you recently installed a third-party driver and right-click it.
- Select the “Disable device” option.
- A window will pop up with the warning message “Disabling this device will cause it to stop functioning. Do you really want to disable it?” Select “Yes” to confirm your action.
If this solves the blue screen error, you can continue using your PC. But, if it doesn’t, try to roll back the driver.
Option 2: Rollback Driver
Device conflicts usually cause BSODs, and rolling back the problematic driver could resolve the issue. To proceed:
- Still, in Safe Mode, press the Windows Key+R and type devmgmt.msc in the “Run” dialog box.
- Press “Enter” to open Device Manager.
- Find the device whose driver you intend to roll back and right-click it.
- Select “Properties” and click the “Driver” tab.
- Click “Roll Back Driver” and choose “Yes”. If the “Roll Back Driver” button is greyed out, it means there are no recent changes.
If rolling back the device driver works, the MAXIMUM_WAIT_OBJECTS_EXCEEDED blue screen error should disappear. If it still occurs, try to uninstall the third-party device driver.
Option 3: Uninstall Recently Installed Drivers
This process should also be carried out in Safe Mode.
- Press the Windows Key+X and open “Device Manager”. Alternatively, you can press the Windows Key+R and type devmgmt.msc in the “Run” box and hit “Enter”.
- In the “Device Manager” window, find the device related to the third-party driver you recently installed and expand it.
- Click the “Uninstall device” option and then check the “Delete the driver software for this device” box.
- Click “Uninstall” to complete the process.
- Restart the system.
Removing the third-party driver should fix the 0xc error. If it doesn’t, go to the next fix.
Fix 3: Update Your Device Drivers
The hardware components in your PC require device drivers to operate properly. When a device driver is deleted, corrupted, or out-of-date, the hardware components may fail to function normally, causing problems with your computer.
An up-to-date driver has fewer bugs and improves the performance of the respective hardware. To update your drivers, you can search for the driver versions separately and then find the hardware manufacturers’ individual websites from where to download the drivers. This is a difficult and exhausting task that you can easily avoid by installing a reliable tool like Auslogics Driver Updater.
The tool identifies broken, missing and outdated drivers, and with a one-click option, you can update all your device drivers safely and fast. With this tool, you don’t have to worry about incompatibility issues. The software ensures that only the official and latest driver versions from the manufacturer are installed.
The Auslogics Driver Updater tool creates system backups as a precaution in case anything goes wrong with the new driver version. Using the program is simple; just install and run it. After the scan, you can choose specific device drivers to update or you can update all of them at once.
If the MAXIMUM_WAIT_OBJECTS_EXCEEDED BSOD was caused by a faulty driver, you can trust this tool to fix it.
Fix 4: Perform System Restore
You can restore your PC to a point before the Maximum_Wait_Objects_Exceeded BSOD started to bug you. Here are the steps to follow:
- By default, Windows opens Automatic Repair after three failed login attempts. To trigger this, use Step 1 to 3 in Fix 1 above.
- Next, go to Advanced options > System Restore. Windows will prepare System Restore and ask you to choose an account.
- Enter your password and select “Continue”.
- In the “System Restore” window, press “Next”.
- Highlight the most recent restore point and click “Next”. If you want to select a different restore point, check the “Show more restore points” box and look for the restore point you prefer.
- Select “Finish” and then click “Yes”.
This process restores your device back to a state when all the programs were functioning normally. This fix should get rid of the 0xc Maximum_Wait_Objects_Exceeded BSOD.
If you still encounter this problem, let us know in the comments below.