How to get rid of Kernel Power 41 error in Windows 10?

By ivan.diskin | October 12, 2019 |

greater than 7 minutes

Have you been getting the Kernel-Power Event ID 41 error recently and don’t seem to find the correct fix? You’ve come to the right place. This issue has been plaguing Windows users for quite some time now, and if you use your PC daily, it can be really annoying and frustrating. The error occurs randomly and you end up losing any unsaved work since the PC just crashes or reboots out of the blue. If you’re looking for information on how to remove the Kernel-Power Event ID 41 issue, keep reading this post for more details.

What Is Kernel-Power Event ID 41 Error?

To fully comprehend how to get rid of kernel power 41 error in Windows 10, it’s important to understand what triggered it in the first place. Usually, when you shut down your computer, it undergoes a series of stages before powering down completely. The next time you boot the PC, Windows runs a check to determine whether the system shut down cleanly. If it didn’t, Windows displays an error message in the Event Viewer which reads:

“The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.”

According to several users, the error started to occur after upgrading from Windows 7 to Windows 10. The error can happen once a day, once every week or several times a day, and it usually shows up when restarting or waking the PC up from sleep.

What Causes the Kernel-Power Event ID 41 Error on Windows 10?

To determine the best solution to apply when faced with the Kernel-Power Event ID 41 issue, it’s important to try and recall what state the PC was in at the time of the event. For instance, were you playing a PC game? Was it after installing new software or adding new RAM (Random Access Memory)? Remembering such situations can help you to narrow down the origin of the error.

While there could be various reasons that could trigger the error, let’s explore a few scenarios in which the Windows Kernel Event ID 41 issue is likely to occur on your Windows 10 PC.

  • Overclocking your system – your CPU can only support the performance that the processor was designed to handle. If you overclock the CPU, then you might run into power failure issues causing the Kernel-Event ID 41 error. The remedy would be to reset all values to factory defaults.
  • Insufficient memory – if you use your PC to play resource-hungry games or handle heavy programs, then you need to install additional RAM. Likewise, you need to verify if you have memory issues, such as a damaged RAM module.
  • Power Supply – power supplies with lower wattage may not be able to handle your PC output. Therefore, if your PC has devices that require a stronger power supply, you might want to replace it with one that has a higher wattage.
  • Driver issues – some users suggested that after updating audio drivers, the error disappeared. Hence, you might want to check if you’re running the latest audio driver version.
  • Incorrect power settings – it turns out that if your PC’s Power Plan settings are misconfigured, then it’s likely that you’ll run into the Kernel-Power Event ID 41 error.
  • Fast startup is enabled – if you or someone else enabled the fast startup feature on your PC, then it could be responsible for the error.

With that said, below we explain how to resolve the Kernel problem.

How to Fix Kernel-Power Event ID 41 on Windows 10

Fix 1: Check for Hardware Issues

The Kernel-Power 41 error is a serious issue that must be fixed immediately, especially if it’s linked to the power going into your PC. Faulty electrical outlets can magnify the problem and you might have to replace some hardware components on your computer. Here are some of the important things you should check on:

  • Check for loose cables on your PSU (power supply unit). The cables should fit properly in their respective slots.
  • Reseat your GPU. For this, you need to have some computer skills. Switch off your PC, open the case, remove the GPU and then place it back in, making sure that it seats properly.
  • Test the PSU. For this, you’ll need to use a different PC. Remove your PSU and connect it to another computer. If the error repeats itself on that PC, then your PSU is the culprit. However, if the error disappears, the issue lies elsewhere. Likewise, try using a different PSU on your system, and if it works without issues, then your PSU may be faulty.
  • Check the power cables running from the PSU to your Windows PC. Also, try replacing your surge protectors and extension cables and then check if the error goes away.

If checking for hardware issues doesn’t yield any positive results, we recommend trying the solutions below one by one until you find the one that fixes your Kernel-Power Event ID 41 error.

Fix 2: Update Your Device Drivers

Audio drivers have been shown to cause the Kernel-Power 41 error. It’s, therefore, advisable to update them and check if it resolves the problem. The best approach is to use a third-party tool like Auslogics Driver Updater to automatically find and replace all of your faulty device drivers with the correct and latest versions. The software is programmed to scan your system to detect any driver-related issues, such as duplicate device drivers and outdated, corrupted, missing or incompatible drivers. The tool then recommends the best fixes.

While being an easy to use driver updating tool, Auslogics Driver Updater not only updates your audio drivers, but also all of the installed device drivers on your PC. We recommend that you always keep your device drivers up to date to ensure a smooth PC experience.

After updating all your drivers, restart your PC and check if you’ll run into the Kernel-Power Event ID 41 error again.

Fix 3: Configure Power Settings

  1. Go to your taskbar, right-click the battery icon and select “Power Options”.
  2. Open the “Change when the computer sleeps” link on the left pane, and then click on “Change advanced power settings”.
  3. In the “Power Options” window that pops up, expand the “Hard disk” option, and change the “On battery (Minutes):” setting to zero (“0”) and the “Plugged in:” setting to “Never”.
  4. Repeat the same process in the “Sleep” category, and set the values in both the “On battery:” and “Plugged in:” settings to “0”.
  5. Click Apply > OK.
  6. Restart your PC for the changes to take effect and then check if it resolved the Kernel-Power Event ID 41 error.

Fix 4: Disable Fast Startup

Enabling the Fast Startup feature is also likely to cause the error. Try to disable it and check if it works for your case.

To do so:

  1. Go to your taskbar, right-click the battery icon, and choose “Power Options”.
  2. Select “Choose what the power buttons do” and then open the “Change settings that are currently unavailable” link.
  3. Under the “Shutdown settings” section, uncheck “Turn on fast startup (recommended)”.
  4. Click the “Save changes” button.

When you disable fast startup, you may notice that your PC’s startup time is a bit slower. If this option resolves your Kernel-related error, then you might have to make do with the slow startup, at least until you find a permanent solution. However, if it doesn’t change anything, enable the fast startup feature to improve your PC’s boot time.

Fix 5: Run the Windows Memory Diagnostic Tool

You need to verify whether or not your memory module is faulty. To do so, here’s what you can do; turn off your PC, disconnect it from the power source and then detach the RAM from the motherboard – (accessing the RAM may vary from one PC to another). Once you detach it, remove any dust or dirt and place it back in. Reconnect your computer to the power source and switch it on. Now, check if the Kernel-Power Event ID 41 issue occurs again. If it does, try running the built-in memory diagnostic tool using the steps below:

  1. Press the Windows Key + S, and type in “Memory” (without quotes) in the search box.
  2. Open “Windows Memory Diagnostic” from the results.
  3. Next, on the window that pops up, select one of the two options, namely “Restart now and check for problems (recommended)” or “Check for problems the next time I start my computer”.
  4. Once your system restarts, the diagnostic tool will initiate the memory test and you can select to run a basic, standard or advanced test by pressing the F1 key. The options also allow you to adjust the following tests:
    • Test mix
    • Cache
    • Pass count

You’ll see the progress bar which indicates the status of the memory test. Once system diagnostics is complete, Windows will restart. If the tool doesn’t find any errors, then it means that your RAM is fine and the error was triggered by something else.

Tweak Your System Settings

If none of the above solutions fixed the Kernel-Power Event ID 41 error on your Windows 10 device, you may need to tweak some PC settings. To do so, we recommend using an optimization tool like Auslogics BoostSpeed to make the process fast, effective, and simple. The program is engineered to scan your entire system to locate all junk files, invalid entries or corrupted keys in your Windows registry, and performance-reducing issues.

Once the scan is complete, you can use the more than a dozen advanced settings to optimize your PC to top speeds. Auslogics BoostSpeed does it all from disk defragmentation to cleaning the registry to removing all junk files from your system. The software is very useful when your PC suddenly becomes slow, lags or crashes constantly. With an optimized computer, you’ll also avoid many common PC problems such as the Kernel-Power Event ID 41 issue.

Did any of the solutions above help you to remove the Kernel-Power Event ID 41 error on Windows 10? Share your experience by commenting below.

Share it:
Do you like this post?
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)