How to resolve HIDCLASS.SYS error on Windows 10?

December 28, 2018 |

greater than 12 minutes

When addressing possible errors which could occur in the Windows operating system, the Blue Screen of Death is at the top of that list. The Blue Screen of Death is not a new problem to the Windows operating system. It has been around for as long as we can remember, dating back to Windows NT 3.1. This error exclusively affects the Windows operating system. This means that other operating systems such as MacOS or Linux do not experience it.

It is rare to find a Windows user who has not encountered a Blue Screen of Death at one point in time. You must be wondering why the BSOD has been around for such a long time and Microsoft has not yet found a permanent fix for it – there is a good explanation for this. First, you have to understand that a Blue Screen of Death can occur as a result of many different reasons, or a combination of those reasons. So, it is almost impossible to find a fix which will cover all the possible factors that can cause a BSOD error.

What causes a Blue Screen of Death?

A BSOD error occurs when your computer encounters an error it cannot fix on its own, and it has to restart to prevent further damage to your computer. It can be problematic because you will lose any unsaved data on your PC. The BSOD can occur as a result of a hardware or software issue, a virus, missing drivers, etc.

When you encounter a Blue Screen of Death, a minidump file that contains all the information about the crash is created. This information can help you find the solution to the problem, and you can send it to Microsoft, who will use it to provide a fix from which other users can benefit if they also encounter the same problem. use the following instructions to find the minidump file:

  • Click on the File Explorer icon on the taskbar.
  • Now, right-click on This PC and select Properties.
  • Click on Advanced system settings. This will open the System Properties window.
  • Click Settings under the Start and Recovery option.
  • In the next window, copy the text in the Dump file box and paste it in the Windows Explorer address bar and press Enter. This will take you to the location of the minidump file.
  • Also, the Blue Screen of Death has important information about the crash, which can help you find the solution, but since your PC restarts almost immediately, you will not have enough time to read the information. If you do not want your computer to restart immediately, you should uncheck the Automatic restart box under the System failure option in the Startup and Recovery window.

Today, we are going to talk about how to fix hidclass.sys blue screen errors. Make sure you go through all the solutions until you find the one that works for you.

Table of Contents

  1. Make sure that all your drivers are up to date
  2. Fix Registry files that are associated with the hidclass.sys Blue Screen of Death errors
  3. Perform a virus scan of your computer
  4. Clear all the junk files from your system, using Disk Cleanup Manager
  5. Restore your PC to an earlier date, using System Restore
  6. Uninstall any newly installed program
  7. Use the System File Checker to check your system files
  8. Make sure your operating system is up to date
  9. Check your hard drive for errors
  10. Check your Memory for errors
  11. Troubleshoot the Blue Screen of Death
  12. Perform a clean boot of your system

Solution 1. Make sure that all your drivers are up to date

Updating your drivers is a very important process to keep your computer working smoothly. In truth, most average users do not know that they need to keep their drivers updated or that there is something called a driver. A device driver is a program that acts as an intermediary between your device and the operating system. When the drivers are outdated, corrupted, or missing, there is a breach, and you will start experiencing issues such as the Blue Screen of Death. To fix this problem, you need to make sure that all your drivers are updated, and we will show you how:

Method 1. Download and install Auslogics Driver Updater.

This is one of the best tools to use when you want to update all your drivers. Since you do not know the exact driver that is causing the issue, you will need a program which can check your computer for all missing, outdated, or corrupted drivers and install the latest manufacturer-recommended version. Using this tool, you do not need to know any information about the device whose driver you want to update. It is very fast and reliable, and you can update all your drivers in just one click. All you need to do is sit back and let it do its job.

Method 2. Download the driver from the manufacturer’s site

The manufacturer’s site is a reliable place to get your drivers. The drivers are often located in the support section of the site. This method has some drawbacks in this case because you do not know the exact driver which is causing the problem. Also, using this method, you have to download and install drivers individually, which is very time-consuming. You also need to make sure that you are downloading and installing the correct driver for your device; if not, the device will not function properly. Some manufacturers have noticed this drawback and created clients which assist users in finding the exact drivers for their devices.

Method 3. Update your drivers, using Device Manager

From the name, you can guess the functions of this tool. The Device Manager manages all the devices that are connected to your computer. You can find all the information about any device here. Use the following steps to update your drivers:

  • Right-click on the Start or Home button and select Device Manager.
  • If a driver is missing, corrupt, or outdated, you will notice a small yellow triangle beside the device.
  • Right-click on it and select Update driver.
  • In the next window, select the option to download and install the necessary driver from the internet.
  • Windows will now install the latest driver for your device.

Solution 2. Fix Registry files that are associated with the hidclass.sys Blue Screen of Death errors

The Windows Registry contains information about all your system files and settings. It stores vital info about the PC’s settings. It is a very powerful tool because it allows you to make changes to Windows settings that are normally unchangeable within the user interface. Problems with the Windows Registry can cause many errors in your system, including the hidclass.sys Blue Screen of Death.

You can fix the hidclass.sys Blue Screen of Death by modifying some entries in your Windows Registry. We do not advise users to edit the Registry without proper assistance. You must be sure of what you are doing before attempting to edit anything in the Registry. This is because any error while making changes to the Registry can cause permanent damage to your operating system. That is why we recommend that you use third-party registry editors to fix the problem.  But if you insist on doing it manually, then you need to create a backup of the registry before attempting to edit it. This will come in handy if you make a mistake while editing. It gives you a chance to restore your Registry. Here is how to create a backup of your Registry:

  • Press the Windows logo key + R on your keyboard to open the Run dialog box.
  • Input regedit in the search area and click OK to open the Registry Editor.
  • Right-click on Computer and select Export. The next window will give you the option to save the file in a location of your choice. Save the file in a secure location. It is saved as a .reg file.
  • Now, you can make changes to the registry without restraints.

Solution 3. Perform a virus scan of your computer

Viruses are also a huge concern of all Windows users. They can affect your computer and cause a variety of problems, one of the issues being the hidclass.sys Blue Screen of Death. It is not uncommon for a virus to cause a BSOD. This is because they can corrupt any particular file in your system. That is why you should perform a virus scan of your computer. To do this, you need to download and install Auslogics Anti-Malware. This tool will scan your computer and eliminate all viruses. Also, you can schedule regular scans of your computer to make sure that no virus is lurking around. The virus definition of this tool is updated on a regular basis to prevent newly created viruses from infecting your PC.

Solution 4. Clear all the junk files from your system, using Disk Cleanup Manager

Junk files accumulate on your computer over time. This process is unavoidable, but you keep it from progressing into a harmful state by frequently deleting the junk files. These files are a product of browsing the internet or deleting files. When the junk files accumulate in your system, they become easy targets for viruses to infect, which can lead to the hidclass.sys Blue Screen of Death. Use the following steps to delete junk files from your system:

  • Press the Windows logo key + R on your keyboard to open the Run dialog box.
  • Input cleanmgr in the search area and press Enter to open the Disk Cleanup dialog box.
  • Click Clean up system files.
  • Now, check all the boxes under the Files to delete option and click OK.
  • Windows will now delete all the junk files from your system.

Solution 5. Restore your PC to an earlier date, using System Restore

System Restore is a very useful and powerful tool on your computer. It has the power to turn back time. This tool acts as a time machine, and it is very useful in solving issues whose exact cause is unknown. System Restore will revert the state of your computer to a previous point in time. This process will affect only the system files and settings. Your personal files and folders will remain untouched, so do not be worried that you will lose data. To perform a system restore, you need to have created a restore point in the past. If for some reason you failed to do so, Windows automatically creates restore points when important changes want to occur in your system. Use the following instructions to restore your computer to a previous date:

  • Click on the Start or Home button and input Recovery in the search box. Select Recovery from the list of results.
  • In the Recovery dialog box, click Open System Restore. This will open the System Restore panel.
  • Click Next to proceed.
  • Now, you will see the list of timestamps you can restore your system to. Select a point before you began experiencing the hidclass.sys Blue Screen of Death and click Next.
  • Follow the instructions of the wizard to complete the process.

In cases where the hidclass.sys Blue Screen of Death error causes your computer to be unable to boot into the desktop; you can still use the System Restore tool to fix this problem. When your computer fails to boot into the desktop more than two times in a row, it will boot into the Choose an option screen. From here, navigate to Troubleshoot > Advanced options > System Restore. Once the System Restore window opens, follow the instructions of the wizard to complete the process.

Solution 6. Uninstall any newly installed program

If the hidclass.sys Blue Screen of Death started occurring after you installed a program. This is an indication that you need to uninstall the program and check if the issue will be resolved. Here are some instructions to uninstall the program:

  • Click on the Start or Home button and input Control Panel in the search box. Select Control Panel from the list of results.
  • Click Uninstall a program from the available options.
  • In the next window, you will see a list of installed programs in your system.
  • Click on the program you recently installed and select Uninstall.
  • Once this is done, you also need to go into Program Files and delete the remnants of the program. This step will not be necessary if you are using a third-party uninstaller.

Solution 7. Use the System File Checker to check your system files

You can check for errors in your system, using the System File Checker. This tool can repair errors like the hidclass.sys Blue Screen of Death. Follow these instructions to use the SFC:

  • Right-click on the Start or Home button and select Command Prompt (Admin) to run it as an administrator.
  • When the Command Prompt window opens, input sfc /scannow and press Enter.
  • The System File Check will begin scanning your system files for errors and fixing them.
  • Once it is done, restart your PC and check if the error has been resolved.

Solution 8. Make sure your operating system is up to date

Updating your operating system can fix many issues, including the hidclass.sys Blue Screen of Death. Windows updates usually contain new features, fixes for common problems encountered by users, driver updates, etc. It is very important to keep your Windows up to date so that it can function at its full potential. Normally in Windows 10, the updates roll out automatically. But for some reason, yours may be held back. So, you need to initiate the update process, takings the following steps manually:

  • Click on the Start or Home menu and click on the gear icon to open the Settings app.
  • Click Updates and Security from the list of options available.
  • Go to the Windows update tab and click Check for updates.
  • Windows will now search the internet for updates for your system and install them.

Solution 9. Check your hard drive for errors

Issues with your hard drive can also be the reason why you are experiencing the hidclass.sys Blue Screen of Death. In this case, you can fix the problem by using the built-in disk checker. Use the following instructions to run the disk checker:

  • Right-click on the Start or Home button and select Command Prompt (Admin) to run it as an administrator.
  • In the Command Prompt Box, input chkdsk /f and press Enter.
  • This tool will start scanning your hard drive for corruption and will fix any errors found.
  • Restart your PC when it is done and check if the error has been resolved.

Solution 10. Check your Memory for errors

You can also start experiencing the hidclass.sys Blue Screen of Death due to issues with your RAM. To fix this problem, you will need to use the built-in RAM checker. It will check your memory for errors and try to repair them. Here is how to do it:

  • Click on the Start or Home button and type Memory in the search box.
  • Select Windows Memory Diagnostics from the list of results to open the Windows Memory Diagnostic dialog box.
  • Click Restart now and check for problems. When your computer restarts, this tool will begin checking your RAM for possible errors. It will try to fix any errors it finds.
  • If the tool finds any issues, we suggest that you replace the RAM.

Solution 11. Troubleshoot the Blue Screen of Death

Because the Blue Screen of Death is a common error, Microsoft has created a built-in troubleshooter to fix this problem. You will not need to take your computer to a professional every time you encounter the BSOD or any other common error. This can save you lots of time and money. Here is how to use the troubleshooter:

  • Right-click on the Start or Home button and select Settings in the pop-up menu to open the Settings app.
  • Click on Update and Security from the list of options available.
  • Select the Troubleshoot tab, and click Blue Screen. Now, select Run the troubleshooter.
  • Windows will try to fix any errors related to BSOD.

Solution 12. Perform a clean boot of your system

You can resolve the hidclass.sys Blue Screen of Death, performing a clean boot. This process boots your computer with only the minimum set of processes required for your operating system to function. This means that if the hidclass.sys Blue Screen of Death is caused by an unknown process, the clean boot will disable it. Use the following instructions to perform a clean boot:

  • Press the Windows logo key + R on your keyboard to open the Run dialog box.
  • Type msconfig in the search area and press Enter to open the System Configuration window.
  • Go to the General tab, and click Selective startup.
  • In the next window, uncheck the Load startup items box.
  • Go to the Services tab, check the Hide all Microsoft services box, then click Disable all.
  • Navigate to the Startup tab and click Open Task Manager. This will open the Startup tab in Task Manager. Make sure that all the processes there are disabled.
  • Go back to the System Configuration window, and click Apply and OK.
  • Restart your computer and check if the hidclass.sys Blue Screen of Death has been resolved.
  • If the error is fixed, return to System Configuration and re-enable the services one by one until you find the culprit. You can now uninstall or disable it permanently.

We hope that this article has shown you how to fix the hidclass.sys Blue Screen of Death. Share it with others who encounter this problem.

We appreciate your ideas and comments, and we are ready to answer all your questions regarding this topic.

Share it:
Do you like this post?
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...